MÁY CƯA CFS-200B1
9 February, 2017MÁY CNC L-1811ATC
9 February, 2017
- Since it was first manufactured in 1971, the SRS-300 has been continuously upgraded and improved to give optimum ripping performance and reliability.
- Robust cast iron & steel construction
- Guarantee 5ft glue line
- Small compact design
- Affordability with durability
- Fully integrated safety guards
- Auto lubrication to 5 points with low oil alert
- Available with single phase saw arbor motor (up to 7.5HP), or without motors and controls for line shaft setup
|
 |
SOLID STEEL CYLINDRICAL GUIDE RAIL AND QUICK CAM CAST IRON FENCE
Ensures accurate setup, quick movement, dust free operations. Magnification lens allows precise positioning to inlaid scale. |
 |
SWING DOWN REAR TABLE
Avoids possible damage to the machine by preventing short work pieces and defective lumber from accidentally sliding between the chain and the table when they are fed to the end. |
 |
ANTI-KICKBACK FINGERS FOR OPERATOR SAFETY
The first row of anti-kickback fingers is independently mounted on an overarm, without being affected by the pressure elevation device. The independent second row of anti-kickback fingers is located at the front of the saw blade. |
 |
LASER LITE & BRACKET (OPTIONAL)
Provides convenient positioning cut, which reduces material waste to a minimum. |
 |
SELF-LUBRICATOR (ELECTRICAL TYPE)
Lubricant flow rate suits constant speed of precision chain, Lubrication frequency is one shot per 5 minutes, Lubrication quantity is adjustable from 3cc to 6cc. If there is insufficient oil, the warning lamp lights up and the feed chain stops automatically. |
 |
SIDE GUARD (OPTIONAL)
The side guard provided at the in feed end gives added safety for the operator. |
 |
OUTFEED PRESSURE PLATE (OPTIONAL)
The additional pressure plate at the out feed end ensures a firm out feed of the work piece. |
- PRECISION-BUILT SAW ARBOR MOUNTING
Made of nickel-chrome steel, large in diameter,accurately ground and dynamically balanced, it runs on precision angular contact type ball bearings which eliminate any radial run out and axial thrust.
- PRECISION CONYEYOR CHAIN AND GUIDE RAILS
Pins are ground. The chain blocks are diamond cut, precision machined and heat treated for positive lumber feeding. Expect years of glue line accuracy from these highly engineered components forged and cut from the best possible steel and cast iron.
|
 |
Specifications |
|
|
Model
|
SRS-300
|
| Minimum working length |
200mm(8″) |
| Maximum thickness |
85mm(3.35″) |
| Distance between saw and column |
350mm(13.75″) |
| Saw arbor motor |
5HP,71/2HP or 10HP |
| Saw arbor speed |
4500 rpm |
| Saw blade diameter |
dia. 200-300mm(8″-12″) |
| Saw arbor diameter |
dia. 25.4mm(1″) |
| Feed motor |
1HP |
| Feed speed |
15,20,25M/min (50,65,82ft/min) |
| Number of holding rollers |
6 |
| Work table height |
760mm(30″) |
| Table area (W x L) |
760x1270mm(30″x50″) |
| Overall dimension(W x L x H) |
960x1530x1350mm (38″x60″x53″) |
| Shipping dimension (W x L x H) |
1150x1500x1480mm (45″x59″x58″) |
| Net weight |
850kgs (1870lbs) |
| Gross weight |
1050kgs (2310lbs) |
