MÁY VENEER CUTMATE 2800

Features:

• able to use the front knife individually
• safety light barrier of knife and pack beam in front
• knives manufactured with high speed steel to extend the grinding life
• pack beam with two cylinders & four firm guides for long-time operation
• adjustable pressure with hydraulic knives and pack beam for all kinds of veneers
• hydraulic-driven rear fence for adjustment of the veneer pack to minimize the scrapes
• high speed movement of the firm working table by servo motor with three sets of linear guides and two sets of ballscrews
• optimizing program including manual cut mode, direct prog. mode, final width mode, etc. to cover all requirements of veneering work
• the user-friendly touch screen control panel with more than 50 sets of different veneer width at the same time in a direct program mode

CutMate D series Movements
A.  The working table is moved forwards and backwards by a servo motor with three sets of linear guides and two sets of ballscrews.
B.  The laser line (B1) indicates where the rear knife will cut in the initial position, while the laser line (B2) is movable according to the wanted veneer cutting width. (option)
C.  The pack beam is moving up and down clamping the veneer bundle completely during the cutting process so that the veneers are straightened out while cutting.
D. The front knife is mounted on the pack beam and cuts from the top against the working table.
E.  The rear knife is mounted on the rear of the table and cuts upwards against the pack beam.
F.  The rear fence is used for the adjustment of the veneer bundle when placing the veneers on the working table.

Recommended Option(s)

1. maximum veneer cutting width：650 mm

2. SECOND-CUT Technology for thick or especially hard species of veneers cutting available – By switching knife beam to second-cut mode, a thin clip of approx. 1 mm is cut off from the veneer pack after the first trim. This unique feature which can only be found in all INNOVATOR’s guillotines is necessary when working with thick or especially hard species of veneers.

3. movable laser line (veneer optimizing system) for fast positioning and calculation of maximum veneer yields
4. remote monitoring maintenance system for faster access from the manufacturer in case of machine breakdown – In case of machine breakdown, our service personnel can check customers’ PLC program via the internet so as to solve the problem in time.

SPECIFICATIONS:

VIDEO:* Technical data is not binding and can be modified without prior notice.\