Grinding Wheel Optional
 |
CAPACITY:
Designed for sharpening blade width range 3/4″-B”.
BLADE MATERIALS:
The sharpener is ideal for sharpening H.S.S. and T.C.T. band blades.
GRINDING HEAD:
The grinding head may be tilted 20°-35°. Suitable for various tooth angle. The grinding head can be lowering adjusted to compensate for wheel diameter reduction resulting from wear, that saves grinding wheel cost.
adjusted to compensate for whell diameter reduction resulting from wear, that saves grinding wheel cost.
ACCURATE SAW PITCH ADJUSTMENT:
The saw pitch adjustment is controlled by shifting the dovetailed positioning slide, which gives accurate saw pitch adjustment.
BLADE FEEDING MECHANISM:
The blade feed is actuated by a precision machined cam, that ensures accurate and smooth feeding of the blade.
STAINLESS STEEL BLADE RESTS:
The band blade rests are manufactured from stainless steel, featuring maximum wear resistance.
CENTRALIZED CONTROL PANEL:
All motion controls are centralized on a control panel for added convenience of operation.
| YOKEN MBS-700A is capable of sharpening band blade with teech on single side or double sides. |
 |
 |
| Teeth on Single Side |
Teeth on Double Side |
|
SPECIFICATIONS:
| Range of blade width |
2″~8″ (50.8~203mm) |
| Max. pitch of teech |
2-3/4″ (70mm) |
| Min. pitch of teech |
2″ (50.8mm) |
| Grinding wheel size |
10″ x 3/4″ x 5×8″ (254 x 19 x 16mm) |
| Grinding wheel speed |
2300 RPM |
| Grinding wheel motor |
1/2 HP |
| Blade feed motor |
1/2 HP |
| Net weight |
350 kgs |
| Machine diamension (mm) |
1250 x 1200 x 1370mm |
* All specifications, dimensions, and design characteristics shown in this catalogue are subject to change without notice.
|
