Store
YFC-36 (CE – CUT-OFF SAW
9 February, 2017
YRS-14 – STRAIGHT LINE RIP SAW
9 February, 2017
S-600 – AUTOMATIC PROGRAMMABLE CUT-OFF SAW
FEATURES
Advanced Servo Controlled System
● Performing defective part cutting and fixed size cutting for meeting various cutting requirement.
● Fast processing speed、high stability and cutting accuracy to ±0.5 mm, solving tough cutting problems.
● It is used for finger joining material and mass material preparation.
● Automatic trimming off head workpiece. (Unavailable in marking lines cutting mode)
● Standard 100 sets of memory data and for optional to be able to connect with USB slot.
● Feeding speed up to 90 M/ min.
● Opting for lengths of infeed table to customer’s requirement.
＊We reserve the right to modify design without prior notice.
Stuff Length Known
(The length of workpiece is known)
● Cutting the appointed lengths and quantity after inputting the value of cutting length or from 51~100 sets of memory data.
Scrap Selection
● Using the fluorescent crayon to mark the front & back of defect parts via AUTO defecting cutting program.
Touch Screen
● Having cutting modes, parameter setting, record and alarm message.
● Automatic controlled feeding device driven by servo motor: According to the inputted value of cutting length, PLC system evaluates the length of workpiece and performs cutting action.
SPECIFICATIONS
● Cutting capacity (Thickness x Width)：
2″ x 16″, 4″ x 14″, 6″ x 12″, 7.5″ x 7.5″
● Saw blade speed：15~60 m/min
● Saw blade size：ø24″
● Saw blade speed ：2000 rpm
● Saw arbor motor：10HP / 15HP
● Table height from floor：920~960mm
● Working Air Pressure：5~7 kgs / 80 cm2
● Net weight：580 kgs
● Gross weight：670 kgs
● Packing dimensions(LxWxH)：930 x 1420 x 1650mm
AUTOMATIC PROGRAMMABLE CUT-OFF SAW
Automatic Position System
● The fast moving pusher reaches a maximum distance of 90 m/min with perfect position.
● According to the appointed length and quantity, pushing the workpiece and cutting it out till finishes all of work. After then reset pushing and cutting action.
