MRS-300 MULTIPLE RIP SAWS
9 February, 2017MRS-175 MULTIPLE RIP SAWS
9 February, 2017
MRS-155 MULTIPLE RIP SAWS
- Extra Robust 100 HP motor
Great Cutting Thickness of 155 mm (6.1″)
Continuous duty 100 HP arbor motor allows deep cutting speeds of thick lumber
- MRS-155 has a massive cast iron base, composing the majority of total machine weight of 2700kg. This design provides incredible absorption characteristics under deep cutting, especially while performing thick lumber ripping with a multi-blade set up.
- Precision chain and rails (dip chain) system facilitates accurate cutting operations.
|
 |
LINK CHAIN FEED
The link chain blocks are made of special cast iron. The high-grade steel connecting pins are heat-treated and precision ground. Each precisely made chain pad guarantees straight line ripping even at high feed speeds. |
 |
LASER DEVICE (OPTIONAL)
Provides convenient positioning of cut, which reduces material waste to a minimum. |
 |
CONVENIENT CHAIN BLOCK REPLACEMENT (OPTIONAL)
Specially designed chain block construction provides convenient replacement of chain block when worn out. |
 |
ANTI-KICKBACK GUARDING SYSTEM
Two upper rows and one bottom row of anti-kickback fingers are engineered to provide comprehensive operator security. |
 |
DIGITALLY-CONTROLLED LUBRICATOR FOR FEED CHAIN
The central lubrication system ensures a permanent oil film between the chain and the guide rails. It varies the oil volume according to the cutting requirements of various kinds of wood. If there is insufficient oil in the oil tank, the warning lamp lights up, and the feed chain stops running automatically. This fully ensures the service life of the feed chain and precision rails. |
 |
| ELECTRICAL AMPERAGE DISPLAY |
- An overload protection of the saw motor. If the load of the saw motor exceeds the rated amperes, the link chain slows down automatically. This prevents the stock push from damaging the saw arbor or damaging the sawblade. Prolongs the life of sawblade by up to 10-20%.
- The variable feeding speed is inverter controlled with frequency motor and easily adjusted by the control panel.
|
|
 |
Specifications |
|
|
Model
|
MRS – 155
|
| Max. cutting thickness |
155 mm |
| Max. cutting width |
350 mm |
| Distance of fixed inside blade to column |
380 mm |
| Min. working length |
700 mm |
| Max. sawblade diameter |
450 mm (18″) |
| Min. sawblade diameter |
355 mm (14″) |
| Sawblade bore |
70 mm |
| Saw arbor diameter |
55 mm |
| Saw arbor speed (using 14″-16″ saw blade) |
2500 rpm |
| Saw arbor speed (using 16″-18″ saw blade) |
3000 rpm |
| Saw arbor motor |
75 HP or 100 HP |
| Feed motor |
3 HP |
| Variable feed speed (variable speed) |
2.5-24 M/min |
| Powered raise and lower of roller group |
1 HP |
| Dust hood dia. |
200 mm |
| Table height (Pass line) |
745 mm |
| Table area (L x W) |
1840 x 790 mm |
| Overall dimensions (L x W x H) |
2340 x 1590 x 1510 mm |
| Packing dimensions (L x W x H) |
2090 x 1720 x 1600 mm |
| Net weight |
2700 kgs |
| Gross weight |
3000 kgs |
