FOUR SIDES MULTI – SPINDLE MOULDER FE-623 | THUONG NGUYEN

Categories: , PLANER MACHINE.

The table surface is made up of high ductile cast iron. The cutterhead guard plate is made of HSS steel and vacuum heat treated, hard chrome plated and precision ground for smooth wear resistance.
Elevation, cutter adjustment, lubrication and maintenance are all conveniently processed at the front of the machine, saving time and labor.
The feeding sizing adjustment of cutters is done through a numerical display control, allowing for convenient and rapid setting.
The machine is equipped with overload protection device for cutters. If an overload occurs, the feeding motor and all cutters will stop within 3 seconds, providing safety to the operator and extending the service life of the machine.
The Feeding roller utilizes pneumatic feeding and is coupled with gearbox for synchronous, powerful feeding effect.
The feeding can be operated in jog mode, for accurate and precise test runs.
The table surface adopts newly designed pneumatic lubrication for feeding, for easy feeding of all types of lumber.
The rear lower spindle can be installed with a gang rip saw, flat knife or forming cutter, according to processing needs.

MODEL		FE-623
No. of cutting spindles		6
Max. moulding height		160mm
Max. moulding width		230mm
Min. length of cut		250mm
Rev. speed of cutting spindle		6200 RPM
Cutting spindle dia.		40mm
Cutting head dia.		Ø100~180mm
Max. cutting dia. of upper spindle		Ø180mm
Max. cutting head dia. of rear lower spindle		Ø255mm
Feeding speed		6-46 m/min (inverter)
Feeding roller dia.		Ø140mm
Feed roller width		100mm
Adjusting range for straight table & guide plate		10mm
Straight table length		2000mm
Elevation adjustment range of vertical spindle		30mm
Cross adjusting range of horizontal spindle		30mm
Elevation motor		1 HP
Feeding motor		7 1/2 HP
Power Required (Standard) HP	Front Lower Spindle	7 1/2 HP
	Right Vertical Spindle	7 1/2 HP
	Left Vertical Spindle	7 1/2 HP
	Front Upper Spindle	10 HP
	Rear Upper Spindle	7 1/2 HP
	Rear Lower Spindle	7 1/2 HP
Machine size		4420x1830x1750mm
Measurements		4600x1870x2000mm
N.W./ G.W.		3500/4300kgs

☎ CALL US:

? Hotline: (+84) 902 98 58 98

?‍♂️ Business Department:

(+84) 933 703 227

(+84) 931 775 220

(+84) 931 775 221

? Email:

[email protected]

Store