HEAVY DUTY THIN CUTTING FRAME SAW (Basic) – MAC-160

Symmetrical Structureof Saw Frame

• The saw frame is a symmetrical construction to ensure uniform pressure on each sawblade.

• This not only improves cutting accuracy, but extends service life of saw blade.

PLC Control

Entire machine motions ar controlled by a high performance PLC for added convenience of operation.

Anti-tearing Device

• Equipped plastic steel block, at first cutting the plastic steel block by the sawblades.

• The anti-tearing device is prevent tearing out on the wood material, and ensuring the wood material integrity.

• Anti-tearing device will be applied in the front and backward of the saw frame to reduce the hairline crack on the workpiece.

Centralized Pressure Regulations

• Each pressure roller is equipped with an independent pressure regulator for individual air pressure adjustment.

• All pressure regulation values are centralized for convenient adjustment and maintenance.

Saw Frame Slideways With Copper Piece

The dovetailed slideways are fitted with copper piece, and precision scraped to upgrade motion smoothness and ensure outstanding wear-resistance.

▲ This machine allows for cutting moisturized wood materials. Height of cutting may reach 200/250/320mm.
▲ Saw path loss1.2~1.4mm for reducing wood material loss while increasing profit.
▲ Maximum feed speed up to 2.0M per minute!
▲ Saw frame speed up to 450~520 times per minute!
▲ Suitable for multiple slicing at a time.
  

Suitable for production of composite parquet, venetian blind, air-tight window, pencil, door and guitar, etc.

Feed speed adjustment

Maximum feed speed up to 0.3~1.2M/min

Sawblades

Stellite and Tungsten saw blades for option.

Cooling blower

Vertical 90° to cooling the saw blades that prevent the saw blade from heat growth and wood chips are evacuated easily.

Electrical control the cutting height

Pressure roller is moving up and down by electrical adjustment. Attach measuring stick for check cutting height.

Side Guide Fence

When the guide fence is positioned at side, the machine can feed one workpiece for cutting.

Side and Center Guide Fence

• When the guides fence is positioned at side, the wood feed through the air controlled pressure roller and moves along the surface of side fence.

• Wood width 160mm

• Wood height 60~320mm